NC7SZ374P6X Z74 的参数 |
功能
Function |
标准 Standard |
类型
Type |
D型 D-Type |
输出类型
Output Type |
三态非反相 Tri-State Non Inverted |
元件数
Number of Elements |
1 |
每元件位数
Number of Bits per Element |
1 |
时钟频率
Frequency - Clock |
100MHz |
传播延迟时间
Delay Time - Propagation |
9.7ns |
|
正边沿 Positive Edge |
触发器类型
Trigger Type |
32mA,32mA |
输出高电平,低电平电流
Current - Output High, Low |
1.65 V ~ 5.5 V |
电源电压
Voltage - Supply |
TinyLogic? UHS D-Type Flip-Flop with 3-STATE Output General Description The NC7SZ374 is a single positive edge-triggered D-type CMOS Flip-Flop with 3-STATE output from Fairchild’s Ultra High Speed Series of TinyLogic? in the space saving SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. This single flip-flop will store the state of the D input that meets the setup and hold time requirements on the LOW-to-HIGH Clock (CP) transition. The output tolerates voltages above VCC in the 3-STATE condition. Features Space saving SC70 6-lead package Ultra small MicroPak? leadless package Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC High Output Drive; ±24 mA at 3V VCC Broad VCC Operating Range; 1.65V to 5.5V Matches the performance of LCX when operated at 3.3V VCC Power down high impedance inputs/output Overvoltage tolerant inputs facilitate 5V - 3V translation Patented noise/EMI reduction circuitry implemented |
Description & Applications |
TinyLogic UHS具有三态输出的D型触发器 概述 NC7SZ374是一个正边沿触发的D型 CMOS触发器带3态输出飞兆半导体的超 高速系列TinyLogic?节省空间 SC70 6引脚封装。该设备是捏造的 先进的CMOS技术,实现了超高速 高输出驱动,同时保持较低的静态功耗 耗散在一个非常宽VCC工作范围。该 设备被指定为工作在1.65V至5.5V VCC 范围内。输入和输出高阻抗时 VCC为0V。容忍的输入电压高达7V独立的 工作电压VCC。这种单触发器将存储 D输入状态符合设置和保持时间 要求低到高时钟(CP)的过渡。 输出容忍上述VCC电压在3-STATE 状态。 节省空间的SC70 6引脚封装 超小型的MicroPak?无铅封装 超高速; TPD2.6 ns(典型值)为50 pF的5V VCC 高输出驱动±24 mA在3V VCC 宽VCC工作电压范围1.65V到5.5V 操作时的性能相匹配的LCX 3.3V VCC 掉电高阻抗输入/输出 耐过电压5V输入方便 - 3V翻译 专利的噪声/ EMI抑制电路实施 |
描述与应用 |
|
技术文档PDF下载 |
在线阅读 |